Pellet Stove Installation in Boerne, TX
Full pellet stove install: hearth pad, venting (3" or 4" PL vent), outside air kit, electrical, and pellet hopper setup. Compatible with all major brands — Harman, Quadra-Fire, Englander. Serving Boerne (3 ZIP codes, 20k residents) and surrounding neighborhoods with same-week scheduling.
Pellet Stove Installation in Boerne
Pellet stove installation places a NEW pellet-burning stove or insert and builds everything it needs to run safely: listed PL-rated venting, code clearances, a non-combustible hearth pad, a dedicated electrical circuit, and a commissioned first burn. It is a build-it-once job — distinct from repair, which services a stove that's already in place and faulting.
Local dossier · Boerne, TX
Boerne is limestone country, and a chimney in Boerne is a piece of masonry first and a venting system second. The Hill-Country homes here — from the historic Hauptstrasse-district stone houses to the custom hill estates off Cibolo Creek and out toward Fair Oaks Ranch — are built of beautiful native limestone and Texas fieldstone, set in mortar that was never meant to last forever. Decades of South-Texas heat, hard water, and the occasional savage freeze work those joints loose. Prime Chimney Experts approaches Boerne masonry the way a craftsman approaches stone: we match the mortar, rake the joints clean, and repoint to a standard that respects the original work. A tuckpointing job done right disappears into the wall; done cheap, it's a smear of gray cement that no Boerne homeowner should accept. The defining mistake in this market is the wrong mortar. Old Hill-Country limestone was laid in soft, high-lime mortar that flexes with the stone; patch it with hard modern Portland cement and the cement, being harder than the limestone around it, drives the cracking into the *stone* itself — turning a repointing problem into a stone-replacement problem. Our technicians read the existing mortar, match its composition and color, and repoint so the repair moves with the wall through Boerne's heat-and-freeze cycle. That is craftsmanship the budget crews don't even know to ask about, and it's the difference between a repair that lasts a generation and one that fails in a season.
From the native-limestone homes of the historic Hauptstrasse district to the custom stone estates of Cordillera Ranch and Fair Oaks Ranch, PCE repoints Boerne masonry to a standard that respects the original stonework.
Why this matters in Boerne
Boerne is a historic Hill Country town in Kendall County — a German-rooted Main Street and luxury Cordillera Ranch estates. Period masonry repointing and clay-liner relining meet large custom-home fireplace work and rural spark-arrestor service. That local stock is exactly why our Boerne crews tailor pellet stove installation to the homes here — not a generic checklist.
Common signs in Boerne homes
- Adding efficient, thermostatically-controlled heat
- Converting an open masonry firebox to a pellet insert
- No dedicated outlet near the planned stove location
- New construction or addition that needs a heat source
Pellet Stove Installation in Boerne (Kendall County) — what's local
Boerne sits in Kendall County (county seat: Boerne). Affluent Hill Country county — historic Boerne masonry plus large custom-home fireplaces and rural spark-arrestor work. For pellet stove installation that means our Boerne crew sizes up the local housing stock before quoting — and follows Kendall County permit requirements for any work that needs an inspection sign-off.
Climate & code file · Greater San Antonio
San Antonio is not one chimney market — it is a dozen of them stacked inside one city, and Prime Chimney Experts services them with a single, unvarying standard. A century-old masonry stack on a King William Victorian, a 1970s ranch firebox off Loop 410, and a builder-grade prefab in a 2015 Stone Oak subdivision are three completely different systems, and what makes the metro specific is the combination of light annual burn and long idle seasons — most homes light a handful of fires across a short, mild winter, then sit unused for nine months.
The rare hard freeze on porous stone
A Feb-2021-class freeze is the limestone killer: water already sitting inside porous stone expands and pops the face. The best defense is keeping water out of the masonry before the cold arrives — seal the breathable stone with a vapor-permeable siloxane repellent, never a film-forming coating that traps moisture inside and accelerates spalling at the next freeze.
Limestone & lime mortar — the one that matters most
If your Boerne chimney is older Hill-Country masonry, do not let a generalist repoint it with hard gray Portland. Soft limestone was laid in a breathable, high-lime mix that flexes with the stone; modern Portland is harder than the stone around it, so it transfers stress into the limestone and drives the cracking into the face — turning a repointing job into a stone-replacement job. We read the existing mortar, match its composition and color, and repoint so the repair moves with the wall through the heat-and-freeze cycle. That's the question budget crews don't even know to ask.
Cedar (Ashe juniper)
Cedar needles and the heavy December–February pollen pack into spark screens and crown washes — a clogged cap is a draft problem and a fire-screen failure at once. We clear and inspect the cap on every sweep. On wood-burners we also flag cedar's hot, fast, resin-heavy burn: it glazes a flue far quicker than seasoned oak, so a cedar-burning Boerne home needs a tighter sweep interval, not the generic annual default.
Long dormancy
A Boerne flue may sit unused for ten months, then get lit hard for six weeks — long enough for animals to nest, debris to collect, and a hairline crown crack to go unnoticed. A fall sweep-and-scan before the short burning season means your first cold-front fire is on a verified, clean, code-ready flue.
Code note · Greater San Antonio
South-Texas / Hill-Country code reality: porous historic stone is sealed only with a vapor-permeable siloxane repellent (never a film-forming coating), and a Feb-2021-class freeze event is the regional benchmark for the cracked-tile and open-joint damage a Level 2 scan exists to catch.
Built to code · Pellet Stove Installation in Boerne
Pellet Stove Installation is held to published national standards no matter the city. Our Boerne crew builds to these and documents the work; the locally-adopted code edition and permit requirements are confirmed with Kendall County's authority on every job.
- Listed PL-vent (UL 641) — Pellet appliances vent through listed PL-vent pellet pipe with gasketed joints, sized to the manufacturer's allowable equivalent length — the positive-pressure exhaust requires the sealed, listed vent, never bare stovepipe or an unlined masonry flue.
- Clearances to combustibles per listing — The new stove holds the clearances to combustibles printed on its UL label; a listed heat shield with ceramic standoffs is what legally reduces them where the room is tight.
- Manufacturer instructions govern (NFPA 211) — NFPA 211 and the appliance's listed installation instructions both govern the install, and the manufacturer's listed clearances and vent limits always take precedence.
- Commissioned + CO check — The stove is run through a full light-off and proven to draw under positive pressure before sign-off, with an ambient CO check on the commissioned unit.
Every pellet stove installation in Boerne
Deliverables
- Full sweep + inspection
- Soot containment + HEPA vacuum
- Level 1 visual inspection report
- Photos of any code issues
- Recommendations + written quote
- Drop cloths + clean cleanup
How a job runs
Plan
Confirm clearances, vent route, and a power source.
Power + Vent
Run the dedicated circuit; build sealed PL-vent with pitch and termination.
Set
Place the stove or insert on its sized hearth pad and connect it.
Commission
Light off, tune feed and air to the pellet, CO-check, and demo operation.
4+ neighborhoods in Boerne
Same-week service across every neighborhood in Boerne. Don't see yours? Call (682) 226-6257 — if it's in Boerne, we cover it.
The Boerne advantage.
Our Boerne crew lives in the metro they serve, across Kendall County. They know which Boerne neighborhoods — Hill Country Village, Esperanza, Cordillera Ranch and more — have crumbling crowns, and which newer builds skipped the cap. Local code knowledge, local referrals, local accountability for every pellet stove installation.
More services in Boerne
Prices shown are starting estimates and may change with the condition, access, and scope we find on site. Only a written quote from an on-site visit is a price we commit to.
Pellet Stove Installation in nearby Kendall cities
We cover pellet stove installation across Kendall County — same crew, same warranty. Nearby Boerne cities we also serve:
Pellet Stove Installation in Boerne — FAQ
What does a code-compliant new pellet stove install include?
A dedicated grounded 120V circuit for the unit, listed clearances to combustibles per the stove's label, an approved PL-vent (often horizontal through-wall with a short vertical rise), a non-combustible floor pad, and a commissioned light-off with a final draft and CO check. Manufacturer instructions and NFPA 211 both govern the job, and the listed clearances and vent limits always take precedence.
Why does a new pellet stove need its own electrical circuit?
Because the auger, igniter, combustion blower, and convection fan all run on power — a pellet stove simply won't operate during an outage without a battery backup. We run a dedicated grounded circuit as part of the install rather than relying on a shared or extension-cord outlet, which is both a code and a reliability issue.
Can a new pellet insert go into my existing masonry fireplace?
Yes, and it's a common install — but it needs a listed pellet vent or stainless liner run up the flue, never a discharge into bare masonry. Pellet exhaust is cooler and under positive pressure, so it would condense and leak through mortar joints. We inspect the chimney first and put any required liner in the quote.
How long does a new install take, and do I need a permit?
A standard through-wall vented stove on an available circuit is most of a day; an insert needing a liner, an outside-air kit, or a new circuit can run longer. Most jurisdictions require a permit and final inspection for a new solid-fuel appliance, and that documentation is also what your homeowner's insurance relies on if there's ever a claim.
My Boerne limestone chimney has crumbling mortar joints — can it be repaired or does it need a rebuild?
In most cases it's repointing, not rebuilding — that's the whole point of catching it early. We rake out the failed mortar to full depth and repoint with a composition- and color-matched mix. Only when the stone itself has lost structural integrity or the stack is leaning do we discuss a partial rebuild, and we'll show you the evidence either way.
Why does the mortar matter so much on Hill-Country limestone?
Because the wrong mortar destroys the stone. Old Boerne limestone was set in soft, high-lime mortar that flexes; if you patch it with hard modern cement, the cement won't move with the wall and forces the cracking into the limestone instead. We match the original mortar's softness and color so the repair protects the stone rather than attacking it.
Will the tuckpointing repair be visible on my historic Hauptstrasse-area home?
Done correctly, no. We match mortar color and joint profile to the surrounding wall so the repointing blends in. On a historic stone home, an obvious gray smear is a failed job — a proper repair should be hard to spot.
When is the best time to repoint a chimney in Boerne?
Fall, ahead of any winter freeze. Open joints let water in, and a hard freeze turns that water into popped stone. Closing the joints before the cold — and waterproofing the breathable stone afterward — is the durable sequence for Hill-Country limestone.
Do you serve all of Boerne?
Yes — our crews cover Boerne's 3 ZIP codes across Kendall County, including Hill Country Village, Esperanza, Cordillera Ranch, plus the surrounding communities.
How soon can you schedule pellet stove installation in Boerne?
We offer same-week scheduling across Boerne, booked by a real person in under two minutes, 7 AM to midnight every day.
Why do Boerne homes need pellet stove installation?
Boerne is a historic Hill Country town in Kendall County — a German-rooted Main Street and luxury Cordillera Ranch estates. Period masonry repointing and clay-liner relining meet large custom-home fireplace work and rural spark-arrestor service. Pellet Stove Installation is part of keeping that local housing stock safe, efficient, and up to code.
How much does pellet stove installation cost in Boerne, TX?
Pellet Stove Installation in Boerne starts from $1,450, but the honest number depends on what a craftsman finds on site — we won't quote premium work blind. A CSIA-certified technician inspects the actual condition, then hands you an itemized, transparent written quote tied to the findings and built to one national standard. No teaser pricing, no surprises. Call (682) 226-6257 for a free, no-pressure Boerne quote.
Do you offer emergency or same-day pellet stove installation in Boerne?
Yes — we run same-week and emergency pellet stove installation across Boerne, scheduled by a real person 7 AM to midnight every day. For an active chimney hazard, call (682) 226-6257 and we prioritize Boerne dispatch so a craftsman is on it fast.
Is there a CSIA-certified pellet stove installation company near me in Boerne?
Our Boerne crew lives in and works the metro across Kendall County, including Hill Country Village, Esperanza, Cordillera Ranch — a certified, local pellet stove installation team genuinely near you, holding the same national craftsmanship standard on every job, not dispatched cold from another city. Call (682) 226-6257.
Last reviewed:
Talk to a CSIA-certified expert today.
Free written quote. Same-week scheduling. 24/7 emergency response when you need it.
24/7 Response
Active leak, animal in flue, post-fire damage, or smoke event? Real humans on the line 7 AM to 12 AM every day — replies in under 2 minutes. Tech dispatch within 2 hours during business hours, subject to crew availability after-hours.
Emergency line