Gas Burner Installation in Boerne, TX
Code-compliant gas burner pan + log set install. Includes gas line connection, valve, igniter, and millivolt or remote control if requested. Serving Boerne (3 ZIP codes, 20k residents) and surrounding neighborhoods with same-week scheduling.
Gas Burner Installation in Boerne
Gas burner installation fits the combustion hardware itself — the burner, the pan it sits in, and the matched ceramic log set that the flame plays across. It is the part that actually makes fire: the burner is sized in BTU to your firebox, drilled or fitted with the orifice that matches your fuel, and laid out so the flame rises clean instead of striking a log and sooting. This is hardware work, not control work — the valve and the ignition are separate services.
Local dossier · Boerne, TX
Boerne is limestone country, and a chimney in Boerne is a piece of masonry first and a venting system second. The Hill-Country homes here — from the historic Hauptstrasse-district stone houses to the custom hill estates off Cibolo Creek and out toward Fair Oaks Ranch — are built of beautiful native limestone and Texas fieldstone, set in mortar that was never meant to last forever. Decades of South-Texas heat, hard water, and the occasional savage freeze work those joints loose. Prime Chimney Experts approaches Boerne masonry the way a craftsman approaches stone: we match the mortar, rake the joints clean, and repoint to a standard that respects the original work. A tuckpointing job done right disappears into the wall; done cheap, it's a smear of gray cement that no Boerne homeowner should accept. The defining mistake in this market is the wrong mortar. Old Hill-Country limestone was laid in soft, high-lime mortar that flexes with the stone; patch it with hard modern Portland cement and the cement, being harder than the limestone around it, drives the cracking into the *stone* itself — turning a repointing problem into a stone-replacement problem. Our technicians read the existing mortar, match its composition and color, and repoint so the repair moves with the wall through Boerne's heat-and-freeze cycle. That is craftsmanship the budget crews don't even know to ask about, and it's the difference between a repair that lasts a generation and one that fails in a season.
From the native-limestone homes of the historic Hauptstrasse district to the custom stone estates of Cordillera Ranch and Fair Oaks Ranch, PCE repoints Boerne masonry to a standard that respects the original stonework.
Why this matters in Boerne
Boerne is a historic Hill Country town in Kendall County — a German-rooted Main Street and luxury Cordillera Ranch estates. Period masonry repointing and clay-liner relining meet large custom-home fireplace work and rural spark-arrestor service. That local stock is exactly why our Boerne crews tailor gas burner installation to the homes here — not a generic checklist.
Common signs in Boerne homes
- Installing a new burner pan and matched log set
- Flame strikes a log and soots a black streak
- Existing burner is the wrong size for the firebox
- Converting the burner between natural gas and propane
Gas Burner Installation in Boerne (Kendall County) — what's local
Boerne sits in Kendall County (county seat: Boerne). Affluent Hill Country county — historic Boerne masonry plus large custom-home fireplaces and rural spark-arrestor work. For gas burner installation that means our Boerne crew sizes up the local housing stock before quoting — and follows Kendall County permit requirements for any work that needs an inspection sign-off.
Climate & code file · Greater San Antonio
San Antonio is not one chimney market — it is a dozen of them stacked inside one city, and Prime Chimney Experts services them with a single, unvarying standard. A century-old masonry stack on a King William Victorian, a 1970s ranch firebox off Loop 410, and a builder-grade prefab in a 2015 Stone Oak subdivision are three completely different systems, and what makes the metro specific is the combination of light annual burn and long idle seasons — most homes light a handful of fires across a short, mild winter, then sit unused for nine months.
The rare hard freeze on porous stone
A Feb-2021-class freeze is the limestone killer: water already sitting inside porous stone expands and pops the face. The best defense is keeping water out of the masonry before the cold arrives — seal the breathable stone with a vapor-permeable siloxane repellent, never a film-forming coating that traps moisture inside and accelerates spalling at the next freeze.
Limestone & lime mortar — the one that matters most
If your Boerne chimney is older Hill-Country masonry, do not let a generalist repoint it with hard gray Portland. Soft limestone was laid in a breathable, high-lime mix that flexes with the stone; modern Portland is harder than the stone around it, so it transfers stress into the limestone and drives the cracking into the face — turning a repointing job into a stone-replacement job. We read the existing mortar, match its composition and color, and repoint so the repair moves with the wall through the heat-and-freeze cycle. That's the question budget crews don't even know to ask.
Cedar (Ashe juniper)
Cedar needles and the heavy December–February pollen pack into spark screens and crown washes — a clogged cap is a draft problem and a fire-screen failure at once. We clear and inspect the cap on every sweep. On wood-burners we also flag cedar's hot, fast, resin-heavy burn: it glazes a flue far quicker than seasoned oak, so a cedar-burning Boerne home needs a tighter sweep interval, not the generic annual default.
Long dormancy
A Boerne flue may sit unused for ten months, then get lit hard for six weeks — long enough for animals to nest, debris to collect, and a hairline crown crack to go unnoticed. A fall sweep-and-scan before the short burning season means your first cold-front fire is on a verified, clean, code-ready flue.
Code note · Greater San Antonio
South-Texas / Hill-Country code reality: porous historic stone is sealed only with a vapor-permeable siloxane repellent (never a film-forming coating), and a Feb-2021-class freeze event is the regional benchmark for the cracked-tile and open-joint damage a Level 2 scan exists to catch.
Built to code · Gas Burner Installation in Boerne
Gas Burner Installation is held to published national standards no matter the city. Our Boerne crew builds to these and documents the work; the locally-adopted code edition and permit requirements are confirmed with Kendall County's authority on every job.
- Input rating matched (NFPA 54) — Per the NFPA 54 National Fuel Gas Code, the burner's BTU input rating is matched to the appliance and its gas supply — an over-fired burner overheats the firebox and is never installed to 'fill' a larger opening.
- Fuel-correct orifice — The burner is fitted with the orifice listed for the actual fuel — natural gas and LP use different orifice sizes and manifold pressures, and a unit fired on the wrong orifice burns sooty or starved.
- Log placement to listing — Each ceramic log is positioned to the manufacturer's placement diagram so the flame does not impinge on a log — impingement is the direct cause of sooting and carbon build-up.
- Combustion proof — After light-off, an ambient CO check confirms the burner combusts cleanly across its full length before the set is signed off.
Scoped from a graded inspection
At Prime Chimney Experts, a gas burner installation is never guesswork. We scope every job from a graded, photographed inspection first — the NFPA 211 level the evidence calls for — so the work is matched to what your flue and masonry actually need, with the report to prove it. The documented inspection is the record the gas burner installation is built on.
Chimney inspection in BoerneEvery gas burner installation in Boerne
Deliverables
- Full sweep + inspection
- Soot containment + HEPA vacuum
- Level 1 visual inspection report
- Photos of any code issues
- Recommendations + written quote
- Drop cloths + clean cleanup
How a job runs
Size
Match burner BTU input to the firebox volume.
Fuel-fit
Set the correct NG or LP orifice and air shutter.
Lay out
Bed the burner and place each log to the diagram.
Commission
Confirm even flame, no impingement, CO-clean.
4+ neighborhoods in Boerne
Same-week service across every neighborhood in Boerne. Don't see yours? Call (682) 226-6257 — if it's in Boerne, we cover it.
The Boerne advantage.
Our Boerne crew lives in the metro they serve, across Kendall County. They know which Boerne neighborhoods — Hill Country Village, Esperanza, Cordillera Ranch and more — have crumbling crowns, and which newer builds skipped the cap. Local code knowledge, local referrals, local accountability for every gas burner installation.
More services in Boerne
Prices shown are starting estimates and may change with the condition, access, and scope we find on site. Only a written quote from an on-site visit is a price we commit to.
Gas Burner Installation in nearby Kendall cities
We cover gas burner installation across Kendall County — same crew, same warranty. Nearby Boerne cities we also serve:
Gas Burner Installation in Boerne — FAQ
Is this the same as replacing my gas valve or ignition?
No — this service installs the combustion hardware: the burner, its pan, and the matched ceramic log set the flame plays across. The gas valve that meters fuel and the pilot or electronic ignition that lights it are separate components with their own jobs. We connect to whatever valve and ignition you already have; if those need work or you want a remote added, that's a different service.
How is the burner sized — does a bigger one make a bigger fire?
It's sized in BTU to your firebox volume, not to the biggest set on the shelf. A burner rated above the firebox throws flame against the back and sides, scorches the panels, and soots the logs black; one rated below it looks thin. We measure depth, width, and height and match the input to it, because an over-fired burner can't be tuned back to safe.
Does the burner change if I have propane instead of natural gas?
Yes, and it's the part most often gotten wrong. LP runs at roughly three times natural-gas pressure and needs a much smaller orifice to meter it, so an NG burner fired on propane over-gasses and soots while an LP burner on natural gas starves to a weak flame. We confirm your fuel at the meter or tank and fit or drill the correct orifice — it's a parts change, never a knob adjustment.
Why does flame placement matter so much on the logs?
Because a single ceramic log a half-inch off the manufacturer's diagram makes the flame strike it, and an impinging flame quenches, soots, and streaks the firebox black within a season. We lay every log to the placement diagram and dress the ember bed so the fire rises clean and glows like real coals — that layout is the craftsmanship you actually see, and it can't be bought off a shelf.
My Boerne limestone chimney has crumbling mortar joints — can it be repaired or does it need a rebuild?
In most cases it's repointing, not rebuilding — that's the whole point of catching it early. We rake out the failed mortar to full depth and repoint with a composition- and color-matched mix. Only when the stone itself has lost structural integrity or the stack is leaning do we discuss a partial rebuild, and we'll show you the evidence either way.
Why does the mortar matter so much on Hill-Country limestone?
Because the wrong mortar destroys the stone. Old Boerne limestone was set in soft, high-lime mortar that flexes; if you patch it with hard modern cement, the cement won't move with the wall and forces the cracking into the limestone instead. We match the original mortar's softness and color so the repair protects the stone rather than attacking it.
Will the tuckpointing repair be visible on my historic Hauptstrasse-area home?
Done correctly, no. We match mortar color and joint profile to the surrounding wall so the repointing blends in. On a historic stone home, an obvious gray smear is a failed job — a proper repair should be hard to spot.
When is the best time to repoint a chimney in Boerne?
Fall, ahead of any winter freeze. Open joints let water in, and a hard freeze turns that water into popped stone. Closing the joints before the cold — and waterproofing the breathable stone afterward — is the durable sequence for Hill-Country limestone.
Do you serve all of Boerne?
Yes — our crews cover Boerne's 3 ZIP codes across Kendall County, including Hill Country Village, Esperanza, Cordillera Ranch, plus the surrounding communities.
How soon can you schedule gas burner installation in Boerne?
We offer same-week scheduling across Boerne, booked by a real person in under two minutes, 7 AM to midnight every day.
Why do Boerne homes need gas burner installation?
Boerne is a historic Hill Country town in Kendall County — a German-rooted Main Street and luxury Cordillera Ranch estates. Period masonry repointing and clay-liner relining meet large custom-home fireplace work and rural spark-arrestor service. Gas Burner Installation is part of keeping that local housing stock safe, efficient, and up to code.
How much does gas burner installation cost in Boerne, TX?
Gas Burner Installation in Boerne starts from $850, but the honest number depends on what a craftsman finds on site — we won't quote premium work blind. A CSIA-certified technician inspects the actual condition, then hands you an itemized, transparent written quote tied to the findings and built to one national standard. No teaser pricing, no surprises. Call (682) 226-6257 for a free, no-pressure Boerne quote.
Do you offer emergency or same-day gas burner installation in Boerne?
Yes — we run same-week and emergency gas burner installation across Boerne, scheduled by a real person 7 AM to midnight every day. For an active chimney hazard, call (682) 226-6257 and we prioritize Boerne dispatch so a craftsman is on it fast.
Is there a CSIA-certified gas burner installation company near me in Boerne?
Our Boerne crew lives in and works the metro across Kendall County, including Hill Country Village, Esperanza, Cordillera Ranch — a certified, local gas burner installation team genuinely near you, holding the same national craftsmanship standard on every job, not dispatched cold from another city. Call (682) 226-6257.
Last reviewed:
Talk to a CSIA-certified expert today.
Free written quote. Same-week scheduling. 24/7 emergency response when you need it.
24/7 Response
Active leak, animal in flue, post-fire damage, or smoke event? Real humans on the line 7 AM to 12 AM every day — replies in under 2 minutes. Tech dispatch within 2 hours during business hours, subject to crew availability after-hours.
Emergency line