Prime Chimney Experts
★★★★★based on 218+ verified customer reviews
Chimney RelineRivercrest | Period-Discreet UL 1777 | PCE" loading="eager" / fetchpriority="high" decoding="async">Chimney Reline Rivercrest | Period-Discreet UL 1777 | PCE
Prime Chimney Experts — DFW chimney & fireplace specialists. Free inspection, written quote, no surprise fees.
Hero
A Rivercrest reline is preservation work. The chimney was built between 1911 and 1940, the original clay tile has been in service for eight to eleven decades, and the modern reline must bring the venting system up to current NFPA 211 and UL 1777 standards without disturbing any of the period architectural detail visible from the property. Prime Chimney Experts handles this with care: 316Ti stainless reline systems sized to the appliance, period-discreet termination caps custom-fabricated to nest invisibly into the original chimney pot or carved cap detail, manufacturer’s lifetime liner warranty, and our own lifetime workmanship warranty. Call **682-226-6257**.Trust Bar
CSIA Certified | NCSG Member Shop | F.I.R.E. Service Verified | BBB Accredited | 4.4 stars / 54 Google reviews | UL 1777 Compliant | Lifetime Warranty on Liner + Workmanship —Why Rivercrest Estates Need Master-Craft Period-Discreet Relining
Rivercrest’s housing inventory dates almost entirely to the 1911-1940 build wave, with original clay tile that has now been in service for eighty-five to one hundred-fourteen years. Structural end-of-life on that tile is a virtual certainty. Most Rivercrest chimneys carry tile that has cracked at multiple sections, has been through at least one low-temperature flue fire in its history, and is no longer a code-compliant venting envelope under NFPA 211. A reline is the right repair on a Rivercrest period chimney for two reasons. First, it preserves the historic masonry envelope — the visible chimney from the curb is unchanged, and the period architectural detail is fully retained. Second, it brings the venting system up to current code with a properly engineered, lifetime-warranted UL 1777 stainless system that will outlast the homeowner. The challenge on a Rivercrest reline is the same as on any 1911-1940 estate: termination cap detail. The original cap on a 1923 Rivercrest Tudor Revival chimney is part of the architecture and absolutely cannot be replaced with a generic stamped-galvanized rain cap. Our reline scope on these properties always includes a period-discreet termination — copper, custom galvanized, or in some cases a fabricated cap that nests inside the original chimney pot or limestone cap detail without changing the visible profile.Our Rivercrest Relining Approach
Every reline begins with a Level 2 video inspection on every flue in scope. Stack heights routinely require scaffold or boom-lift for proper inspection. Tile condition, flue geometry, offsets, and termination detail are documented in advance. For these period chimneys we install **316Ti stainless**, titanium-stabilized, in heavy-gauge wall thickness above the UL 1777 minimum, rated for solid-fuel and chimney fire conditions. Every liner is wrapped in ceramic fiber insulation, joined with locking-band connectors, fitted to the original masonry firebox with a manufacturer-approved connector, and terminated at the cap with a sealed top plate. Termination cap detail is custom-fabricated to match the period architectural detail, coordinated with the property’s preservation consultant where applicable. We custom-fabricate cap profiles in copper or galvanized to nest invisibly into the existing chimney-pot or carved-limestone cap. Lead time on custom cap fabrication runs four to ten weeks. Every reline is photographed at every stage, registered in our warranty database, and finished with the manufacturer’s lifetime warranty plus our lifetime workmanship warranty. Call **682-226-6257**.Pricing for Rivercrest
A single-flue 316Ti reline on a Rivercrest period chimney runs $7,200 to $13,500 because of stack-height access, period-discreet termination fabrication, and preservation-consultant coordination. Multi-flue scope on a 1920s-1930s estate runs $13,000 to $25,000. Every quote is line-itemed in writing with custom termination fabrication, scaffolding/boom-lift, and preservation consultation broken out. Manufacturer’s lifetime warranty on each liner and PCE’s lifetime workmanship warranty on installation.Process and Permitting
A residential reline does not require a building permit when the chimney envelope is not structurally modified. Wood-to-gas conversions where new gas piping is run require a mechanical permit through the City of Fort Worth. Standard timeline is six to ten weeks from initial call to final walkthrough including custom termination fabrication.Frequently Asked Questions
**Will the reline change the visible chimney from the curb?** Only at the termination cap detail, which we custom-fabricate to nest invisibly into the existing period architecture. On most properties the reline is functionally invisible from the curb after final walkthrough. **Do you coordinate with preservation consultants?** Yes. Most Rivercrest properties maintain a preservation consultant of record, and we coordinate any visible-exterior change with that consultant before fabrication. **What alloy for a wood-burning Rivercrest chimney?** 316Ti stainless, titanium-stabilized, rated for solid-fuel and chimney fire conditions, in heavy-gauge wall thickness above the UL 1777 minimum. Manufacturer’s lifetime warranty. **Will scaffolding or boom-lift be required?** Yes on most Rivercrest stacks. Stack heights and the period architectural detail require scaffold or boom-lift for both diagnosis and reline installation. **Is the reline warranty actually lifetime?** Yes. The liner manufacturer warrants the liner itself for life. PCE’s lifetime workmanship warranty covers installation labor — joints, top plate, termination, custom cap fabrication. Both transfer to a buyer.Customer Review — Rivercrest
“Our 1928 Italian Renaissance Revival’s main flue had cracked tile from accumulated service life and an undocumented chimney fire decades ago. PCE custom-fabricated a copper termination that nests inside the original chimney-pot detail and is invisible from the property. Nine weeks from initial call to final walkthrough. Manufacturer’s lifetime warranty plus PCE workmanship warranty in writing. The chimney still reads as 1928 from the curb.” — *G. Wickersham, Rivercrest, Fort Worth*Schedule Your Rivercrest Chimney Reline
Call **682-226-6257** for a CSIA-certified master technician. Period-discreet UL 1777 stainless relining. Custom termination fabrication. Lifetime workmanship warranty layered onto manufacturer’s lifetime liner warranty. —Internal Links
– Area hub: [Chimney Services in Rivercrest](https://primechimneyexperts.com/areas/rivercrest/) – Service hub: [Chimney Reline](https://primechimneyexperts.com/services/chimney-reline/) – Sister service: [Level 2 Inspection">Level 2 Inspection](https://primechimneyexperts.com/services/level-2-inspection/) – Sister service: [Smoke Chamber Repair](https://primechimneyexperts.com/services/smoke-chamber-repair/) – Adjacent area: [Chimney Reline Westover Hills](https://primechimneyexperts.com/chimney-reline/westover-hills/) —JSON-LD
Our Sister Companies — Specialists in Related Services
Texas Service Experts is part of a network of CSIA-certified chimney specialists. Depending on your specific need:
- Texas Service Experts — general chimney sweep/inspection
- Texas Chimney Experts — chimney repair/masonry