Prime Chimney Experts
★★★★★based on 218+ verified customer reviews
Chimney RelineWestlake TX | Multi-Flue 316Ti | PCE 76262" loading="eager" / fetchpriority="high" decoding="async">Chimney Reline Westlake TX | Multi-Flue 316Ti | PCE 76262
Prime Chimney Experts — DFW chimney & fireplace specialists. Free inspection, written quote, no surprise fees.
Hero
Westlake estate chimneys carry three, sometimes four, flues on a single tall stack. Relining one of them — usually triggered by a Level 2 finding of cracked clay tile or a gas conversion">wood-to-gas conversion on the great-room fireplace — is rarely the right scope. The right scope is a coordinated reline of every flue in the stack, sized to each appliance, in 316Ti stainless for any solid-fuel application, with a single custom-fabricated multi-flue cap finishing the entire termination. Prime Chimney Experts handles this as the integrated estate-scale project it actually is, with a manufacturer’s lifetime warranty on each liner and our own lifetime workmanship warranty on the installation. Call **682-226-6257** for a CSIA-certified master technician.Trust Bar
CSIA Certified | NCSG Member Shop | F.I.R.E. Service Verified | BBB Accredited | 4.4 stars / 54 Google reviews | UL 1777 Compliant | Lifetime Warranty on Liner + Workmanship —Why Westlake Estates Need Master-Craft Multi-Flue Relining
The defining feature of a Westlake estate chimney is the multi-flue stack. A typical Vaquero, Terra Bella, or Quail Hollow estate carries flues for the great-room fireplace, the primary-suite fireplace, often a kitchen-hearth flue or a separate dining-room hearth, and occasionally a fourth flue for an outdoor pavilion or pool-house, all sharing a single tall stone or brick-and-stone tower with a custom-fabricated copper or limestone cap. When one flue needs relining the others usually do too. The clay tile in all four flues was installed at the same time, by the same mason, exposed to the same weather, and is at the same point in its service life. A Level 2 inspection">Level 2 inspection finding cracked tile in one flue is almost always identifying the leading edge of a stack-wide condition. Relining one flue and ignoring the others delivers a partial repair that will need to be revisited within five years. Three Westlake-specific patterns drive our reline volume. **Coordinated multi-flue scope** on Vaquero and Terra Bella estates, where Level 2 inspection finds tile damage on multiple flues and the right repair is a stack-wide reline plus custom cap fabrication. **Wood-to-gas conversion on great-room fireplaces** specified for sealed-combustion gas inserts, which require properly sized stainless liners per the appliance manufacturer’s installation manual. **Pre-listing scope** on $4M-plus Westlake homes preparing for market, where the listing agent needs every flue documented and warranted in writing before the buyer’s inspector arrives.Our Westlake Relining Approach
Every Westlake reline begins with a Level 2 video inspection on every flue in scope. We document tile condition, flue geometry, offsets, draft characteristics, and termination detail on every flue before specifying the reline scope. Stack heights routinely require scaffold or boom-lift access for proper inspection. Liner specification is sized per the appliance manufacturer’s installation manual and per UL 1777 listed-system instructions for each flue independently. Solid-fuel flues (great-room wood-burning fireplaces) get **316Ti stainless**, titanium-stabilized, in heavy-gauge wall thickness above the UL 1777 minimum. Gas appliance flues get **304 stainless** sized to the BTU output. Every liner is wrapped in ceramic fiber insulation, joined with locking-band connectors, fitted to the appliance with manufacturer-approved connectors, and terminated at the cap with a sealed top plate. Cap fabrication is the detail that distinguishes a Westlake estate reline from a routine residential reline. We custom-fabricate multi-flue caps in copper, stainless, or galvanized to match the architectural detail of the original cap, coordinated with the HOA architectural committee, with proper terminations for each flue without compromising draft on any of them. Lead time on custom cap fabrication runs four to eight weeks depending on the shop’s queue. Every reline is photographed at every stage, registered in our warranty database, and finished with the manufacturer’s lifetime warranty plus our lifetime workmanship warranty.Pricing for Westlake
Single-flue 316Ti reline on a Westlake estate runs $4,800 to $7,500 because of stack-height access. Two-flue coordinated scope runs $9,500 to $14,000. Three-flue full-stack scope runs $14,000 to $22,000. Four-flue stack reline including custom multi-flue cap fabrication runs $22,000 to $42,000 depending on cap material and architectural complexity. Every quote is line-itemed with liner alloy and gauge, insulation, termination detail, custom cap material, scaffolding/boom-lift, and HOA architectural review fees broken out. Manufacturer’s lifetime warranty on each liner and PCE’s lifetime workmanship warranty on installation.Process and Permitting
Residential reline scopes do not require a building permit under Town of Westlake code unless structural change is made to the chimney envelope. Wood-to-gas conversions where new gas piping is run require a mechanical permit, coordinated with the licensed gas contractor. HOA architectural review is required in Vaquero, Terra Bella, Quail Hollow, and the Knolls when the cap is visible — which on Westlake estate chimneys it always is. Standard timeline is four to six weeks from initial call to final walkthrough on a single-flue scope, six to ten weeks on a multi-flue stack reline, eight to fourteen weeks when custom multi-flue cap fabrication is part of scope.Frequently Asked Questions
**Should I reline one flue or all of them?** On a multi-flue Westlake stack, the right scope is almost always a coordinated reline of every flue in the same scope. Tile in all flues was installed at the same time and is at the same point in its service life. Relining one and ignoring the others is a partial repair. **Can you fabricate a custom multi-flue cap to match the existing detail?** Yes. We coordinate with copper, stainless, and galvanized fabrication shops capable of matching original detail and patina. HOA architectural committee approval coordinated before fabrication. **Will boom-lift or scaffold be required?** Yes on most Westlake estate stacks. Stack heights of 25 to 40 feet require scaffold or boom-lift for both diagnosis and reline installation, broken out as a separate line item. **How does the lifetime warranty layer with the manufacturer’s warranty?** Manufacturer warrants the liner itself for life. PCE workmanship warranty covers installation labor — joints, top plate, termination, cap fabrication. Both transfer to a buyer when the home transacts. **What alloy for a great-room wood-burning Westlake fireplace?** 316Ti stainless, titanium-stabilized, rated for solid-fuel and chimney fire conditions, in heavy-gauge wall thickness above the UL 1777 minimum.Customer Review — Terra Bella, Westlake
“Our Terra Bella estate has a four-flue stack, and a Level 2 found cracked tile on three of them. PCE relined the entire stack in one coordinated scope, fabricated a new four-termination copper cap to match the original detail, coordinated with the HOA architectural committee, and finished on a written ten-week schedule. Manufacturer’s lifetime warranty on every liner. PCE lifetime workmanship warranty on the installation. The cap weathered to a patina that matches the rest of our copper detailing within a year.” — *D. Sutherland, Terra Bella, Westlake*Schedule Your Westlake Chimney Reline
Call **682-226-6257** for a CSIA-certified master technician. Multi-flue reline scope, custom cap fabrication, lifetime workmanship warranty layered onto manufacturer’s lifetime liner warranty. —Internal Links
– Area hub: [Chimney Services in Westlake](https://primechimneyexperts.com/areas/westlake/) – Service hub: [Chimney Reline](https://primechimneyexperts.com/services/chimney-reline/) – Sister service: [Level 2 Inspection](https://primechimneyexperts.com/services/level-2-inspection/) – Sister service: [Crown Rebuild](https://primechimneyexperts.com/services/crown-rebuild/) – Adjacent area: [Chimney Reline Trophy Club](https://primechimneyexperts.com/chimney-reline/trophy-club/) —JSON-LD
Our Sister Companies — Specialists in Related Services
Texas Service Experts is part of a network of CSIA-certified chimney specialists. Depending on your specific need:
- Texas Service Experts — general chimney sweep/inspection
- Texas Chimney Experts — chimney repair/masonry